傳統IVO總是著手于于化學工業自主化與過程中操作類車輛設備的發明,在精度等級、安全安全保障、穩固性、類車輛設備的多元性還有可行標準上無法大家讓。在自主化調節器器企業有深厚的依據和的地位,類車輛設備類形有許多,領*精*調節器器開發的潮范。
IVO編碼器 GI355 - GI356
特征:
- 帶軸ø10mm或ø6mm的編碼查詢器
- 辨別率max. 6000 ppr
- 電子光學感測器器
- 夾緊或同樣法蘭盤
- 重工業標
- 高發動機轉速max.10000 rpm
- 警報打印輸出A, A inv., B, B inv., N, N inv
- 熱度比率為5 VDC至100°C
能選
- 304不繡鋼方案GE355
- ATEX準許
- 防蝕蝕守護
配件
- 無線聯接器和線纜
- Z 141.001 Female connector M23, 12-pin, less cable
- Z 141.003 Female connector M23, 12-pin, 2 m cable
- Z 141.005 Female connector M23, 12-pin, 5 m
- Z 141.007 Female connector M23, 12-pin, 10 m cable
- GI355重新安裝零件
- Z 119.013 Adaptor plate for clamping flange for modification into synchro flange
- Z 119.017 Mounting angle for clamping flange (M3)
- Z 119.025 Adaptor plate for clamping flange, mounting by eccentric fixings (order separately)
- GI356安轉輔料
- Z 119.006 Eccentric fixing, single
- Z 119.015 Mounting adaptor for synchro flange
- Z 119.035 Bearing flange for encoders with synchro flange
IVO編號規則器 GI355 - GI356 | |
Operating voltage | 5 VDC ±10 * |
10...30 VDC | |
4.75...30 VDC | |
with reverse voltage protection | |
Current consumption | Max. 30 mA (w/o load), at 24 VDC |
Max. 60 mA (w/o load), at 5 VDC | |
Limit frequency | 150 kHz |
Output signals | Channel A, B, N + inverted |
Output stages | |
5 VDC | Line driver to RS422 |
10...30 VDC | Push-pull output, short-circuitproof or line driver to RS422 |
4.75...30 VDC | Push-pull outp., short-circuit-proof |
Speed | Max. 10000 rpm |
Start-up torque | |
without sealing (IP54) | < 0.010 Nm |
with sealing (IP65) | < 0.015 Nm |
Shaft loading | |
axial | < 20 N |
radial | < 40 N |
Moment of inertia | 1.45 x 10-6 kgm2 |
Housing material | Aluminium |
Weight | Approx. 250 g |
Operating temperature | -20...+100 °C at 5 VDC |
-20...+85 °C at 10...30 VDC | |
-20...+85 °C at 4.75...30 VDC | |
Protection type | |
Shaft without sealing | IP 54 |
Shaft with sealing | IP 65 |
Humidity | Max. relative humidity 95 *, non-condensing |
Resistance | |
Vibration | DIN EN 60068-2-6 |
<100 m/s2, 16-2000 Hz | |
Shock | DIN EN 60068-2-27 |
<1000 m/s2, 4 ms | |
Interference resistance | DIN EN 61000-6-2 |
Emitted interference |
DIN EN 61000-6-4 |